Wholesale custom 50um-1000um Milled Carbon Fiber Powder
Product description:
Milled Carbon Fiber Powder has many advantages, such as high strength, low density, good conductivity and thermal conductivity. However, due to its complex preparation process and high cost, the application of carbon fiber powder is currently relatively limited. With the continuous development of carbon fiber technology and the reduction of costs, the application prospects of Carbon Fiber Powders will be even broader.
Product | Carbon fiber powder |
Material: | Carbon fiber |
Filament diameter: | 7.0μm-15μm |
Tensil strength: | 3530MPa |
Tensil Modulus: | 230GPa |
Carbon content: | ≥95% |
Thermal conductivity: | 10 W/M·k |
Density: | 1.76g/cm3 |
Volume Resistivity: | 1.5×10-3/Ω.cm |
Features:
It is stable, electrical conductive,self-lubricating and reinforcing.Because of that It can composite with resin ,plastic, metal, rubber and so on. So It can reinforce the strength and wear resistance of the materials. Carbon fiber powder are based on the polyacrylonitrile fiber as the raw material.
Application:
Currently it is widely used in all kinds of thermosetting and thermoplastic resin reinforced material, such as filling
PTFE(around 15%), reinforced nylon, enhanced PP, ABS, enhanced reinforced epoxy, phenolic, rubber, glass, polyamide (PA), polyformaldehyde (POM) and polysulfone (PSF), polyphenylene oxide (PPO), poly methyl methacrylate (PMMA), etc., it can be also composited with matrix such as metal, ceramic to increase the strength and wea-resistance of the products.